HOME > Taper-Sealing Type Gasket for CF-Flanges> Technical Details 3
 Taper-Sealing
Taper-Sealing Type OFHC Gaskets
for CF Type Flanges

Taper-sealing gasket widens usable diameter of connected ports.

Conventional gasket is sheared by the penetration of knife edges during a process of flange tightening. The tightening force which is loaded with securing bolts is considerably consumed in the shearing the gasket. As a result, formed seal area becomes small consequent on the waste of tightening force. Higher tightening torque is required to obtain sufficient seal area.

Usable diameter of connected tubes with Taper-Sealing gasket is a full diameter of the connected tubes. It is favorable to insert equipment of larger diameter ( Q-mass, manipulators, etc.) into smaller vacuum ports.

Previous / Introduction of Taper-Sealing gasket / Next

Tokyo Headquarters 2-23-9 Yaguchi, Ohta, Tokyo, 146-0093 Japan.
Fax: (+81) 3-5741-1185
E-mail: info@sev-vacuum.com

About Vacs SEV How to Order Disclaimer Privacy Policy